MD200-1 Sample concentrator

Features

1. High precision and wide range of temperature control

2. Blowing a large number of samples at one time

3. Blowing each sample independently

4. Amount of airflow can be adjusted

5. Easy operation; safe and reliable to use
 

Specification
1.Temperature range: RT.+5~150℃
2.Temperature control discrepancy:  ≤ ±0.5℃ (RT+5℃~150℃)
                                                                  ≤ ±1℃ (100℃ ~ 150℃)
3. Low Nitrogen consumption of 330ml/min/sample
4. Time required for temperature to increase from 40℃ to 150℃: ≤30m minutes
5 .Maximum input power: 200W
6. Temp. control discrepancy: ± 0.1℃
7. Dimensions: 280W x240D x 500H
8. Net weight: 6Kg
9. All units will fit and are recommended to be used in a bench-top.ventiated hood
10. Needles length: 150mm
11. Standard Blocks: See "Blocks for MD200"

Blocks for MD200 

 

 

 

Type	Parameter	Capacity	Dimension (mm)
BK01	6 mm	49	96 x 96 x 49
BK02	7 mm	49	96 x 96 x 49
BK03	10 mm	25	96 x 96 x 49
BK04	12 mm	25	96 x 96 x 49
BK05	13 mm	25	96 x 96 x 49
BK06	15 mm	12	96 x 96 x 49
BK07	15 mm	16	96 x 96 x 49
BK08	16 mm	12	96 x 96 x 49
BK09	16 mm	16	96 x 96 x 49
BK10	19 mm	12	96 x 96 x 49
BK11	19 mm	16	96 x 96 x 49
BK12	20 mm	9	96 x 96 x 49
BK13	26 mm	9	96 x 96 x 49
BK14	28 mm	4	96 x 96 x 49
BK15	40 mm	4	96 x 96 x 49
BK16	0.5 ml Centrifuge tube	49	96 x 96 x 49
BK17	1.5 ml Centrifuge tube	25	96 x 96 x 49
BK18	2.0 ml Centrifuge tube	25	96 x 96 x 49

               

                         Block                                      Flow Control Valve 

 

 

 

 

 

 

Write a review

Your Name:


Your Review:
Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: